1. Lubricate “O” rings on pump housing with any biodegradable lubricant when pump is removed from motor.

NOTE: a light coating of lubricant is all that is required.

2. Make sure the pump stem is pulled all the way out (about 2”). Push the pump up into the water motor, and turn pump 1/4 turn, port to front.

NOTE: the guide slot must be aligned to fit into the key on the inside of the water motor.

3. After installing pump into bottom of water motor - loosen Jaco nut on pump and insert hose into fitting. Re-tighten Jaco nut.

Removal of Pump, click here
Troubleshoot Pump, click here

To learn more, contact Chemilizer at 1.800.234.7211